Wind Uplift Request
Project:
Sales Rep:
Sales Rep Email:
Date:
Total SQ Feet:
Project Address:
Closest Major City:
Specification Requirements:
Are Specifications Available?
(if yes, please provide a copy)
Yes
No
Series 300
ZIP-RIB
PermLok
Batten-Tite
SS Panel
TwinLok
Panel Type:
Panel Width & Gauge Being Proposed:
Select all that apply:
FM Approved Roof Required
UL 90
ASTM E 1592
ASTM E 331 (E 1646)
ASTM E 283 (E 1680)
What is the building code?
Other Known Design Criteria:
P.E. Stamp Required For:
(check which apply)
Uplift Pressures
Shop Drawings
Building Exposure:
Check Appropriate Category:
B:
Building located in city center, with 50% of buildings adjacent over 70 ft. in height. Urban and suburban with surrounding obstructions less than 3 stories high.
C:
Open fields with scattered obstructions, or rolling hills.
D:
Flat and unobstructed areas for at least 1 mile adjacent to building. (coastal areas / plains)
Check Appropriate Description:
Enclosed:
All sides are walled.
Partially Enclosed:
At least half the sides are walled. (garages, hangars)
Open:
No walls. (canopies, pavilions)
Building usage & approx. number of occupants at any time in a specific area:
(e.g. School-1,200 students in auditorium):
Building Geometry:
Check Appropriate Roof Geometry:
Gable
Hip
Monoslope
Multiple Gable
Barrel / Arch
Saw Tooth
Roof Pitch:
Eave Height:
Horizontal Run to Ridge:
Length of Building:
Width of Building:
Is there a Parapet Wall?
Yes
No
If so, how high is it?
Curved Panel?
Yes
No
If yes, provide radius:
If radius is NOT available, provide chord & height dimensions:
Roofing Substrate Assembly:
Type of Roof Assembly Being Specified:
Steel Deck
Concrete Deck
Plywood Deck
Lightweight Deck (lightweight concrete, cellular concrete, gypsum, tectim)
Open Steel Purlins
If Steel Deck, provide gauge:
If purlins are specified over the deck, provide gauge & spacing o.c.:
If Concrete Deck, provide thickness:
If Plywood Deck, provide thickness:
Lightweight Deck: If there is a steel deck beneath, what is the gauge?
If Open Steel Purlins, provide gauge & spacing o.c.:
If any insulation is specified over the decking, provide the type & thickness:
Notes:
Retrofit or Tear-Off Construction
(if applicable)
Type of existing roof assembly:
Steel Deck
Concrete Deck
Plywood Deck
If Steel Deck, provide gauge:
If Concrete Deck, provide thickness:
If Plywood Deck, provide thickness:
Type of structural support beneath existing deck:
Steel Purlin
Timber Purlin
Lightweight Deck (lightweight concrete, cellular concrete, gypsum, tectim)
If Steel Purlin, provide gauge & spacing o.c.:
If Timber Purlin, provide thickness & spacing o.c.:
If Lightweight Deck, provide thickness:
Lightweight Deck: If there is a steel deck beneath, what is the gauge?
If any insulation is over the decking, provide the type & thickness:
If necessary, what type of framing system will be used?
Additional Comments:
reCAPTCHA helps prevent automated form spam.
The submit button will be disabled until you complete the CAPTCHA.
Contact Information